| Air Curtains for Doorways Up to 8 feet
Fantech introduces a new line of Air Curtains with an elegant modern
design that offers an optimum combination of low noise level, sufficient
air flow and minimal turbulence. The Air Curtain is designed for use
above entry doors and small industrial doors with heights up to 8 feet
Fantech Air Curtains are specifically designed to
prevent the loss of cool or conditioned air and the entry of hot
contaminated air. The products can be used to meet a number of
requirements:
- To prevent warm air infiltration in cold shops
and doorless reach-in refrigerated cases
- To keep out fumes, dust and insects,
maintaining a clean environment
- To invite customers in by allowing entry doors
to stay open
- A built-in switch with two speeds (high and
low).
- Corrosion-proof casing in hot-dip galvanized,
powder-coated sheet steel
- Compact design to allow for easy positioning
- Easy installation, with cord and plug attached
- An optional door switch can be wired to the
unit so that the fan goes from low to high speed when the door is
opened.
- Available in 36" or 48"
Fantech Air Curtains significantly reduce energy
consumption - especially when there is a substantial temperature
difference between inside and outside air.
Because
of the compact design of these units, including front air-intake, the AC
Series can be mounted where there is limited space between the top of
the doorway and the ceiling. Fantech Air Curtains can also be mounted in
false ceilings.
In wide openings, several units can be mounted
side by side, to form one continuous air curtain.
|
Model |
AC3600 |
AC4800 |
|
Airflow Max. Speed (cfm) |
795 |
1000 |
Airflow
Reduced Speed (cfm)
Air Velocity Max. Speed (ft/min.) |
590
1970 |
765
1970 |
Sound Level Red./Max. Speed [dB(A)]
Amperage (amps) |
44/53
0.5 |
45/54
0.55 |
|
Voltage/Phase (volts) |
115/1~ |
115/1~ |
|
Weight (lbs.) |
22 |
26 |
|
Dimensions
(LxHxD) (inches) |
36
x 91/2 x 8 1/2 |
48
x 91/2 x 8 1/2 |
|

|