|
|
Inline Duct Fans
These quality fans install into home or office ductwork for out-of-view, year-round comfort. Operate by wiring directly to the main blower of your heating/cooling system, an on/off switch, or try DuctStat® Plug-In Thermostat™. With balanced aluminum or polycarbonate blades these are ideal for boosting supply air, return air, or venting. If you have doubts or are unfamiliar with this type of installation work, seek the services of a qualified electrician. For use with10/120 Volt AC, 60Hz fuse or circuit breaker protected power source only in a manner approved by all applicable codes. ESPEnergy, does not provide electrical connection information .For your safety and protection follow all instructions and adhere to applicable building and/or electrical codes. We do recommend you to review the installation instructions before purchasing this product. 1 year warranty. Operating range is 50°F to 140°F. Exposure to temperatures outside this range voids the warranty. We recommend that you clean your In-Line Duct Fan™ at regular intervals, similar to what is recommended for the fan of your furnace, but at least twice a year. Keep your In-Line Duct Fan™ free of lint, dust, and debris. The In-Line Duct Fan™ must never be exposed to temperatures over 140°F (60°C). Always leave the In-Line Duct Fan accessible for service.
|
(1-866-377-3637)
Send mail to webmaster@espenergy.com with questions or comments about this web site.© ESPEnergy, LLC. All rights reserved |