PB110 Bath Fan

 

 

 

 

Pricing Information


Fantech Bath Fan

 

Order Item # PB110

 

Our Price: $189.00

 


 
Shipping Information


$10.85 Flat Rate Shipping
 

 

 


 

110 CFM fan, one Ceiling Grille and grille housing with damper. Uses 4" duct.

 

 

Unlike standard exhaust fans, the motor of a Fantech fan mounts in a location away from the living area such as an attic. Small unobtrusive Ceiling Grilles, with or without lights, can be mounted in multiple locations over the shower, the toilet and/or the tub then ducted to the remote fan to quickly and efficiently whisk away moisture, steam and odors. One fan can also be used to ventilate two bath-to-back baths.

 

 

Technical Data
New Improved Ceiling Grille Housing Simplifies Installation

• Improved Airtight Design
• Longer Quick-Connect Duct Collar
• Set Screw Locks Hanger Bars in Position
• Key Hole Mounting Slots
• UL “Wet Location” Rating
• IC “Insulation Contact” Rating
• Superior CFM at higher static pressure
• 100% speed controllable
• Rated for continuous duty
• Models available for use with 4" duct
 

All models are UL Listed for use in wet locations.
HVI (Home Ventilating Institute) certified for performance.
All models are IC Rated.
 
Contractor Friendly Installation
Fantech Premium Bath Fans are “flex duct friendly” making installation fast and easy. We recommend:

1. Use insulated flexible duct. (Insulated flex duct allows sound from the fan to dissipate gradually so that it can not be heard in the bathroom.)

2. Ideally you should have at least 8 feet of flex duct between ceiling grilles and fan.

3. If applicable, use multiple ceiling grilles or ceiling grilles with lights.
 

 

Additional Information

We recommend that you read the installation instructions before purchase
Exhaust KitsInstallation Instructions pdf

 

 

 


 
FAN SIZING FOR BATHS UNDER 100 SQ. FT.

According to the guidelines of HVI (Home Ventilating Institute) baths 100 square feet or smaller require one CFM per square foot of bathroom*. To find the square footage simply multiply the length of the bath by the width.
EXAMPLE
7' x 9' bath = 63 sq. ft.

YOU WILL NEED
A 63 CFM FAN.

* Minimum 50 CFM
NOTE: For proper airflow in typical installations (when duct losses aren't calculated), use the 0.4"Ps (static pressure) rating point for correct fan selection.

 

 

 


 

Warranty Information

7-year manufacturer warranty