|
|
|
|
|
 |
 |
 |
 |
 |
|
|
Wall Switch Sensor with Night Light
• Hotel Bath/Toilet Rooms • Hotel Sink Area • Hospital Bathroom
The NightLite Sensor is a combination 24/7 night light and occupancy sensor capable of turning the lights off when the room is vacant. The NightLite Sensor is the perfect solution for Hotel and Hospital bathrooms where guests tend to leave the light on all night. A user programmable time delay ensures that once the room is vacated the sensor will time out and turn off the lights. The WSD-NL comes factory set in Semi-Automatic (Manual On) mode meaning the button needs to be pushed in order to turn on the lights. Besides Semi-Automatic operation, several other On Modes and Switch Modes can be programmed into the sensor using the front push-button. • Lighted Push-Button • Manual On or Auto On Selectable • Designed for High Humidity • Fits next to GFI Receptacle • No Minimum Load Requirements •Vandal Resistant Lens
• Physical Specs Weight: 5.00oz Size: 4.2” H x 1.8” W x 1.5” D (10.67 x 4.57 x 3.81 cm) Color: Ivory, White, Gray, and Almond Mounting: Single Gang Switch Box Mounting Height: 30-48 in. (76.2 to 121.9 cm) • Environmental Specs Corrosion Resistant Operating Temp: 14º to 85º F (-10° to 29° C) Storage Temp: -14º to 160º F (-26° to 71° C) • Electrical Specs Load Rating (1 Phase Only): 800 W @ 120 VAC, 1200 W @ 277 VAC Motor Load: 1/4 HP Frequency: 50/60 Hz (Timers are 1.2 times for 50 Hz) • Other UL, CUL, and CSA Listed 5 Year Warranty Made in U.S.A.
WSD-NL Spec Sheet pdf file
Wiring Diagram pdf file
Area of Coverage pdf file
5- Years
|
|
(1-866-377-3637)
Send mail to webmaster@espenergy.com with questions or comments about this web site.© ESPEnergy, LLC. All rights reserved |
